Product Overview: The "Power Cutter" for Silos
When handling heavy lumps or abrasive ores, standard pneumatic slide gates often get stuck. The Electro-Hydraulic Flat Gate is built for these tough conditions.
Why Electro-Hydraulic?
- Unstoppable Force: The hydraulic cylinder delivers up to 5x more force than an electric motor screw, ensuring the gate plate can slice through a column of heavy rock to close fully.
- Overload Protection: If a large rock blocks the gate, the hydraulic system's relief valve activates, preventing the motor from burning out (unlike electric actuators).
- Self-Locking: The gate stays in position even if power fails, preventing accidental material leakage.
Typical Applications
This valve is installed at the bottom of silos, bins, or hoppers to control discharge into conveyors or feeders.
- Mining: Discharge of Iron Ore, Copper Ore, and Crushed Stone.
- Power Plants: Coal bunker discharge (Raw coal or Pulverized coal).
- Cement Plants: Clinker silo discharge (High temperature).
- Metallurgy: Handling Sinter, Coke, and Slag.
Structure & Durability
- The Body: Fabricated from rigid Carbon Steel (Q235) or Stainless Steel. The frame is reinforced to withstand the high pressure of the material column above it.
- The Gate Plate: Made of NM400 Wear-Resistant Steel or High Manganese Steel. It won't bend or wear out quickly under abrasion.
- The Actuator: Independent Electro-Hydraulic Push Rod (DYTZ Series). It combines the motor, pump, and cylinder into one compact unit. No external hydraulic piping is needed.

Technical Specifications
- Model: DZF Series.
- Opening Size: 200x200mm up to 2000x2000mm.
- Thrust Force: 250kg to 5000kg (Depending on model).
- Speed: 15-30 mm/s (Adjustable).
- Material Temperature: Standard < 100°C (High temp version up to 400°C available).
|
A*A |
B*B |
C*C |
L |
H |
n-d |
Electro-hydraulic Device |
Power (kw) |
|
400*400 |
456*456 |
496*496 |
2360 |
140 |
12-φ14 |
DYTZ1750-400 |
2.2 |
|
450*450 |
510*510 |
556*556 |
2510 |
140 |
12-φ14 |
DYTZ1750-450 |
2.2 |
|
500*500 |
560*560 |
606*606 |
2660 |
140 |
16-φ18 |
DYTZ1750-500 |
2.2 |
|
600*600 |
660*660 |
706*706 |
2790 |
160 |
16-φ18 |
DYTZ2500-600 |
3 |
|
700*700 |
770*770 |
820*820 |
3270 |
160 |
20-φ18 |
DYTZ2500-700 |
3 |
Customization Options
- Gate Liner: We can line the gate plate with Hard-Facing Welding or Ceramic Tiles for extreme abrasion resistance.
- Limit Switches: Pre-installed proximity sensors to send "Open/Closed" signals to your DCS/PLC system.
- Installation: Can be mounted horizontally (standard) or vertically.

FAQ
Q: What if the power goes out?
A: The hydraulic system has a self-locking function, so the gate will remain in its current position. We can also provide a Manual Hand Pump option to open/close the gate manually during outages.
Q: Is it dust-tight?
A: Yes. We use adjustable packing seals (graphite or PTFE) around the gate plate to prevent dust from leaking into the atmosphere.
Hot Tags: Electro-Hydraulic Flat Gate Valve, China Electro-Hydraulic Flat Gate Valve manufacturers, suppliers, factory, Electro hydraulic Flat Gate, Others, Manual Flat Gate, Sluice Gate











