Home > Knowledge > Content

Security technology for feeding machines

Jan 30, 2023

1. Regular maintenance and overhaul is an important means to extend the service life of the machine and ensure normal work, and users should pay attention to it. For lubrication, the following points should be noted:
(1) This machine adopts thin oil splash lubrication, the lubricating oil should be determined according to the place of use, temperature conditions, generally using gear oil;
(2) It should be ensured that the thin oil surface in the exciter is higher than the height of the oil standard (filled through the joint elbow), and it must be replaced every 3-6 months, and clean gasoline or kerosene should be used to clean the oil tank, bearing raceway and gear surface when changing the oil.


2. Safety technology:
(1) The operators of this machine must undergo safety technology education;
(2) When running, it is strictly forbidden to stand on the side of the machine, touch the body with their hands, adjust, clean, clean or overhaul, etc.;
(3) The machinery and equipment should be grounded, the wire should be reliably insulated, and installed in the snakeskin tube, and often check whether the motor wiring is worn and leakage.

 

Send Inquiry