Home > News > Content

Operational Inspection Of Vibrating Screens

Mar 05, 2023

The equipment needs to be collected and assembled and tested without load before leaving the factory, and can only leave the factory after checking the qualified indicators, therefore, after the equipment is shipped to the use site, the user should check whether the parts of the whole machine are complete according to the packing list and the complete set of equipment delivery order, and whether the technical documents are flawed. After the equipment arrives at the site, it should not be directly placed on the ground, and should be placed smoothly on a flat sleeper, and the distance from the ground is not less than 250mm. If stored in the open air, it should be covered with an oilproof cloth to prevent wind and rain erosion. High frequency vibrating screen.


High-frequency vibrating screen is referred to as high-frequency screen, high-frequency vibrating screen (high-frequency screen) is composed of exciter, slurry distributor, screen frame, frame, suspension spring and screen and other components.


High-frequency vibrating screen (high-frequency sieve) has high efficiency, small amplitude and high screening frequency. The principle of high-frequency vibrating screen is different from that of ordinary screening equipment, because the high-frequency vibrating screen (high-frequency screen) adopts high frequency, on the one hand, it destroys the tension on the surface of the slurry and the high-speed oscillation of fine-grained materials on the sieve surface, accelerates the large-density useful minerals and segregation, and increases the probability of contact between materials smaller than the separated particle size material and the sieve hole.

 

Send Inquiry